Installation Manual

9
Reverse With Confidence
™
Installation Guide
Camera Connection:
• Locate the clearance lights wiring on your vehicle. You may need
to remove the interior panel in order to locate. Connect the power
cables for camera: Red wire to light's positive; Black wire to chassis
ground.
Monitor Connection:
• Cigarette lighter adapter: Firmly insert the lighter plug to ciga
rette lighter socket.
• Loose lead wire: To power the system connect the power (RED) 12V
+ wire to ignition power and the ground (BLACK) wire to the chassis
ground. These are
the only wires needed to power the system. Press
power and "arrow" keys to toggle between different views.
Three positive trigger wires (BLUE-CH2, YELLOW-CH3, WHITE-CH4)
represent a channel and activate when trigger wire connectS to 12V.
• "CAM2" is the designated backup channel. To have the the backup
camera display when going in reverse, connect the BLUE wire to
reverse power (or any power source that comes on only in reverse).
The other channels can similarly be triggered (i.e. side cameras can
be triggered by the turn signals, etc.)
DO NOT INSTALL monitor where it may obstruct driver view or
obstruct air bag devices.