Installation Manual

REAR VIEW SAFETY
21
Troubleshooting
Monitor Displays Blue Screen & Displays No Signal
• Do a hard reset, unplug all
cables and power cables leave
out for 1 minute and then
reconnect them.
• Check to ensure that the con
nection to the camera is tight.
No Image On Screen
• Verify camera is on correct
camera input
• Verify camera is connected
to power/ground
Signal Issues
• The antenna booster is an
extendable antenna that can be
used in case of signal issues.
• The cable is attached just like
the standard antenna by
screwing on the connection
The antenna itself is attached
magnetically.