Manual

Installation Instructions
3. Align the host bracket screw groove and the
plate screw holes, Locking screw.
4. Plug the anti dismounting cap into the screw
hole. Connect the cable.
5.5 Display Installation
Monitor
REAR VIEW SAFETY
4
- Connect the 4 pin connection on the camera to the 4 pin connection on the
camera wiring harnass.
- Connect the power wires on the wiring harness to a 12V power source from the
reverse lights.
NOTE:
When connecting the power wires, connect the RED to power and the BLACK to ground.
Red to back light +12
red to 12V power
Black to GND
Black to GND