Instruction Manual

- 23 -
1.1.6.1 CODE OSD
The 1.1.6.1 CODE OSD screen provides the function of character overlay for each video channel,
which determines the display position of the characters according to the abscissa and ordinate values. Note:
The CH 5 is used for IP cameras connected to the RJ 45 connector, and the IP camera can also set the
character overlay function individually.
ENABLE
Select from two options:
ON Enable Video channel OSD
OFF Disable video channel OSD
CH-X.
CH 1 – 5
XPOS
(0 to 99)Abscissa position parameters.
YPOS
(0 to 99)Ordinate position parameters
CHANNE
L NAME
Character overlay channel name :
Can be described according to the installation location, the default CH1-CH5,
Action Bar Keys (Select, then press ENTER):
SAVE
To saveand activate the new settings
SETUP MENU 1.1 '
'GENERAL'
GENERAL 1.1.6
'CODE OSD'
CODE OSD SETUP
1.1.6.1
Mobilemule™