Instruction Manual

- 24 -
1.2.1 CHANNELMODE
The 1.2.1 CHANNEL MODE screen allows the selection of one of four camera groups to match the
variety of AHD, Analog and IP Cameras which may be connected to the DVR Camera inputs.
The MDVR must be restarted each time a new combination of cameras is connected using these five steps:
CAMERA MIX
Determine the types of cameras connected to the MDVR
SELECT
Select (Blue highlight) the group of cameras matching the cameras connected
to the MDVR
CHECK BOX
Press ENTERto select the checked group
RESTART
Select SAVE, then press ENTER and THE SYSTEM WILL RESTART in
order to recognize the new camera mix
GO TO
AFTER THE DVR RESTARTS go to the 1.3.5.1 IP CAMERA SETUP
screen
Select one of five options:
MIX OPTION 1
Only AHD Cameras may be connectedto Camera Input Channels 1, 2, 3, 4
MIX OPTION 2
Only STANDARD Cameras may be connectedto Camera Input Channels 1, 2, 3, 4
MIX OPTION 3
AHD Cameras are limited to connection to Camera Input Channels 1 and 2
STANDARD Cameras are limited to connection to Camera Input Channels 3 and 4
MIX OPTION 4
ANALOG Cameras may be connectedto Camera Input Channels 1, 2, 3, 4
IP Camera may be connected to the RJ45 Port
SETUP MENU 1.2
'CHANNEL MODE'
CHANNEL MODE 1.2
CAMERA MODE 1.2.1
Mobilemule™