Instruction Manual

- 26 -
1.3.2.1 MAIN CODE
The 1.3.2.1 MAIN CODEscreen provides the ability to configure each of the MDVRs five video channels to
provide the optimum balance of Video Type, Frames per Second (FPS), Resolution and Quality while
ensuring the maximum file storage is achieved on the installed storage media. NOTE: CH 5 is for the IP
Camera connected to the RJ 45 connector.
RECORD
Select from two options:
ON Enable Video channel recording
OFF Disable video channel recording
RES.
CH 1 – 4 D1, HD1, CIF, 960H
CH 5 720P, 1080P
The higher the chosen resolution, the more storage space will be required and the video will
be more detailed.
FPS
(1 to 30) Select the Frames Per Second to be recorded. The higher the number, the closer to
real time fluidity (30 FPS for NTSC and 25 FPS for PAL settings) action will be recorded.
The higher the setting the more storage space will be required for the file.
QUALITY
(1 to 8) Enter the record resolution setting desired with 1 being the highest quality. A higher
quality setting will require more file storage space, but yield a more detailed video.
AUDIO
Select from two options:
ON Enable audio recording (If selected camera channel has a microphone connected)
OFF Disable audio recording of an audio Pickup equipped video source
ENABLE
Select from two options:
ON Enable the video loss alarm
OFF Disable the video loss alarm
Action Bar Keys (Select, then press ENTER):
SAVE
To save and the 1.1.3.1 USER SETUP screen will appear
SETUP MENU 1.3
'RECORDING'
RECORD 1.3.2
'MAIN CODE'
MAIN CODE
1.3.2.1
Mobilemule™