Instruction Manual

- 33 -
1.4.1.1 SENSOR SETUP
The 1.4.1.1 SENSOR SETUP screen defines the trigger response relationship between each of the 8 Sensor
In (Inputs) and actions available.
SENSOR IN
(IO)
Define thetrigger responserelationship for each of the 8 SENSOR IN (Input)
NAME
Name of SENSOR IN device (8 Characters)
LINK TO
Enter Camera channel (CH) to switch to full screen and display video when
assigned SENSOR IN is triggered
ENABLE
Select from two options:
ON The selected functions are ‘On’
OFF The selected functions are ‘Off’
E- LEVEL
HIGH Detect when Voltage is ‘On’
LOW Detect when Voltage is ‘Off’
TYPE
Select type of response is to be sent when the V LEVEL SETTING is matched:
ALARM Triggers a response sent to one of the two SENSOR OUT ports
SYSTEM Triggers an entry into the SYSTEM and/or ALARM/EVENT LOG
POST RECORD
Select the time delay in seconds for ending a triggered recording
SNAPSHOT
Takes a single picture
UP PLAT
Alarm information reported to the management center
SETUP MENU 1.4
'ALARMS'
ALARM SETUP 1.4.1
'SENSORS'
SENSOR SETUP
1.4.1.1
Mobilemule™