Instruction Manual

- 37 -
1.4.5.1 ALARM OUT SETUP
The 1.4.5.1 ALARM OUT SETUP screen defines the Input – Trigger – Response relationships with the
various sensors and reporting devices connected to the MDVR. The ALARM OUT SETUP screen adds the
ability to add ALARM and ALARM logging responses to the other criteria set within the individual Sensor
and Device screens.
ALM SOURCE
（ASOURCE）
The input to trigger the ALM (Alarm) Output
ALM OUTPUT
(OUTPUT)
The output path to a Sensor Output
LOG
Select whether the detected Alarm is also logged as an ALARM
SENS IN
Select one of 8 Sensor Inputs (SENS IN)
TEMP IN
(DISK BTP)
Select one of 5 Temperature inputs (TEMP IN 1 is standard. All others require
optional external sensor devices.
SPEED
Monitors High and Low speed settings in 1.4.2.1 SPEED SETTINGS
G SENSOR
Monitors X, Y, Z settings in 1.4.3.1 G SENSOR SETUP
VIDEO LOSS
Monitors Video Loss (Camera malfunction)
MOTION DET
Monitors movement or light changes sensed by the 1.4.6.1 MOTION DETECTION
SETUP
HW ERROR
Monitors factory set criteria for the detection of hardware level errors
GPS ERROR
Monitors factory set criteria for the detection of GPS Module signal reception errors
Action Bar Keys (Select, then press ENTER):
SAVE
To save and activate the new settings
SETUP MENU 1.4
''ALARM'
ALARM 1.4.5
'ALARM OUT'
ALARM OUT
SETUP 1.4.5.1
Mobilemule™