Instruction Manual

- 39 -

1.4.6.1.1 MOTION DETECTION SETUP GRID

The 1.4.6.1.1 MOTION DETECTION GRID is the second of three screens required to setup and test the

Motion Detection function. It allows the user to define a detection zone to automatically trigger the functions

set in the 1.4.6.1 MOTION DETECTION SETUP and the 1.4.5.1 ALARM OUT SETUP screen.

Motion Detection Zone (MDZ) definition:

A User defined grid of transparent squares overlaid on a Camera view creating a response to light or

movement. The User can define the active motion detection zone with Blue squares.

CLEAR

No detection set

YELLOW

Cursor position

BLUE

Detection area set

Once all three related screens are properly setup, a detected movement meeting the parameters set will

trigger a response governed by the 1.4.5.1 ALARM OUT screen.

Create the Active Motion Detection Zone:

SELECT

Move Yellow Cursor to the square to be enabled as part of the Detection Zone

ENTER

Press to enable (Becomes Blue) or disable the square (Becomes Clear)

REPEAT

Continue until the Detection Zone is defined

RETURN

Press to return to the 1.4.6.1 MOTION DETECTION screen.

The affected camera button will display a Green background if it is setup to be tested.

For a motion detected response to trigger an ALARM and/or LOG the event it is

necessary to go to the 1.4.5.1 ALARM OUT SETUP screen and complete the

related setup process

To setup additional cameras repeat the above and continue setting up the parameters for each camera as

necessary.

SETUP MENU 1.4

'ALARM'

ALARM 1.4.6

'MOTION'

MOTION DETECTION 1.4.6.1

'SETUP'

MOTION DETECTION SETUP

GRID 1.4.6.1.1

CURSOR

DETECTION

NO DETECTION

Mobilemule™