Instruction Manual

- 49 -

1.6.5.1 SERIAL DEVICE SETUP

The 1.6.5.1 SERIAL DEVICE SETUP screen allows up to two RS 232 data or control devices to be setup

using industry standard RS 232 code settings.

DEVICE

Select each of two control channels to setup connected devices:

COM 1

COM 2

NAME

Enter a unique name for the RS 232 device (Up to10 characters)

BAUD

Select to match the settings on the RS 232 device

DATA BIT

Select to match the settings on the RS 232 device

STOP BIT

Select to match the settings on the RS 232 device

CHECK

Select to match the settings on the RS 232 device

ENABLE

Select from two options:

ON The selected functions are ‘On’

OFF The selected functions are ‘Off’

The 1.6.5.1 SERIAL DEVICE SETUP screen allows up to eight compatible RS 485 data or control devices

to be setup using industry standard RS 485 code settings.

NOTE: This does not include the PTZ Cameras setup in the 1.6.1.1 PTZ CAMERA SETUP.

MCUCOM1

Enter a unique name for the RS 485 device (Up to10 characters)

NAME

Select to match the settings on the RS 485 device

Action Bar Keys (Select, then press ENTER):

SAVE

To save and activate the new settings

SETUP MENU 1.6

'PERIPHERALS'

PERIPHERALS 1.6.5

'SERIAL''

SERIAL DEVICE

SETUP 1.6.5.1

Mobilemule™