Instruction Manual

21
IO
 Enable: incl. “OFF, Emergency, Front Door, Middle Door, Back Door, Driver Door, Other Door,
Near Beam, Distant Beam, Right Beam, Left Beam, Braking, Reverse, Fog Lamp, Position Light,
Horn, Air Conditioner, Neutral Gear, Retarder, ABS, Heater, Clutch, Door Sensor, Smoke
Sensor, Customize”
 Level: the “Electrical level”. User defined whether high or low electrical level treated as alarm.
By default, 0~4V is low level, 4~25V is high level
 Delay: the set period ensures only one alarm is processed during the set period, instead of
the same alarm be read more than once
 Hold: be treated as an alarm when alarm length surpassing the set period
 Record: enable or disable recording when there’s alarms
 Linkage: means “alarm linkage”. OFF or user defined to an external device like alarm lamp
 Preview: assign a channel for alarm live video with full screen image
Speed
 Speed Source: incl. GPS/Vehicle/Mix. Note: the “vehicle” needs work together with “Pulse”.
 Pulse: the pulse rotation rate per a kilometer. It works when “vehicle” is set as speed source.
 L-ALM: alarm be triggered when speed surpassing limit value
 L-Warn: alarm be triggered when speed surpassing limit value
 H-Warn: alarm be triggered when speed surpassing limit value
 H-ALM: alarm be triggered when speed surpassing limit value
Vehicle Safety - It's All We Do.
TM