Instruction Manual

22
 Limit: edge value for alarm trigger
 Hold: treated as an alarm when alarm length surpassing the set period.
 Record: choose whether to activate alarm recording or not.
 Linkage: means “alarm linkage”. OFF or user defined to an external device like alarm lamp
G-Sensor
G-Sensor alarm is detected by changes from x, y and z axis. Adjust before first use.
 Enable: enable or disable
 Limit: set the edge value for alarm triggering
 Hold: be treated as an alarm when alarm length surpassing the set period.
 Record: choose whether to activate alarm recording or not.
 Linkage: means "alarm linkage”. OFF or user defined to an external device like alarm lamp
 Delay: if triggered event is longer than preset time, it's considered as an alarm.
 Adjust: reset X Y Z value to normal reaction.
Video
Detect
 Enable
: the enable or disable video detection.
 Limit: alarm threshold
 Sense: 3 levels to choose about sensitivity
 Record: whether to need recording when alarm appears
Vehicle Safety - It's All We Do.
TM