Instruction Manual

Table Of Contents

3. INSTALLATION

Power Cable Connection

For field installation, the anode (red) and cathode (black) should directly connect to car battery.

For office testing, the anode (red) and ACC (yellow) can be combined. Lock the DVR to power on.

Server Connection

Note: This setting is for MDVR with WIFI/3G/4G functions.

Step 1: Insert a 3G/4G sim card

Step 2: Go to DVR’s “terminal set”, input a phone number. Note: this ID is a unique number

recognized by server.

Step 3: Go to DVR’s “center set”, input phone number, input server IP and port number accordingly.

Serial Port

The DVR features 8x alarm inputs and 2x alarm outputs.

An alarm is d

etected upon changes from high and low electrical level, which can link to multi vehicle

connections, incl. car brake, on/off switch and alarm button. For example, when braking light is

triggered, DVR detects a high electrical level signal and output an alarm depending on setting,

otherwise it’s detected as low electrical level.

The st

andard current is 200mA. A relay will be needed if higher power consumption is used for

operation.

Vehicle Safety - It's All We Do.