Installation Manual

11
Reverse With Confidence
™
Wiring Camera & Monitor
• Grid-lines: The grid-lines are
also carried through the blue
wire. To use the grid-lines
for
reversing, connect the blue
wire to a reverse power.
• There is a built-in voltage
regulator for our systems which
can handle 9-32 volts. Real
consumption is 10 to 30 Volts.
Note: The camera and
monitor can always be
activated by manually
pushing the power button on
monitor. This is in addition to
utilizing the positive triggers.
Note: If connecting power
directly to battery, the camera
is always ON and therefore can
drain battery. Therefore it is
recommended to connect
power to an ignition switched
accessory power source.