Installation Manual
Table Of Contents
REAR VIEW SAFETY
14
Monitor Operation
MENU
REV
CAM
t
t
POWER
ON / OFF
MENU/
SELECTION
BUTTON
CAMERA
SELECTION
DOWN
ARROW
UP
ARROW
ROTATION
IMAGER
(Exit when in
MENU
mode)
• To turn onthe monitor, press “POWER” button.
• To get to the menu, press “MENU” and use arrows to choose your settings
• Toadjust brightness, press“MENU”. Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the brightness.
• Toadjust contrast press“MENU”. Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the brightness
• Toadjust saturation press “MENU”.Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the brightness
• Toadjust sharpness press “MENU”. Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the brightness
• Toadjust day/night press “MENU”. Use arrows to choose desired mode and press “MENU” to select.
Once selected, use arrows to change mode.
• Tochange the name press “MENU”. Usearrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the letters
• Toadjust trigger source press “MENU” to select. Once selected, use arrows to choose desired line and press
“MENU”.
• Toadjust trigger delay press “MENU” to select. Once selected, use arrows to choose desired camera and press
“MENU”.
• Toadjust distance grid press “MENU”to select. Once selected, use arrows to choose desired camera and press
“MENU”. Use arrows to set the distance.
• To adjust grid positionpress “MENU” to select. Once selected, use arrows to choose postion and press “MENU”.
• To set auto power press “MENU” to select. Once selected, use arrows to choose o or on and press “MENU”.
• To reset press “MENU” to select. Once selected, use arrows to choose yes or no and press “MENU”.
• To return to previous press “REV” when in menu.
• To rotate screen press “REV”.
• To adjust the volume press “UP” and “DOWN” buttons.