Instruction Manual

- 29 -
1.3.5.1 MIRROR SETUP
The 1.3.5.1 MIRRORSETUP screen provides the ability to save selected video channels and any data
EMBEDDED in their video frames (See 1.1.5.1 DISPLAY SETUP) using the parameters set in the
configure each of the six video channels to provide the optimum balance of Video Type, Frames per Second
(FPS), Resolution and Quality while ensuring the maximum file storage is achieved on the USB Drive
inserted in the Rear USB 2.0 Port or SD card. NOTE: CH 9 for up to IP Cameras connected to the RJ 45
connectors.
ENABLE
Select from two options:
ON Enable Video channel recording
OFF Disable video channel recording
RES.
CH 1 – 9 D1, HD1, CIF
The higher the chosen resolution, the more storage space will be required and the video will
be more detailed.
FPS
(1 to 30) Select the Frames Per Second to be recorded. The higher the number, the closer to
real time fluidity (30 FPS for NTSC and 25 FPS for PAL settings) action will be recorded.
The higher the setting the more storage space will be required for the file.
QUALITY
(1 to 8) Enter the record resolution setting desired with 1 being the highest quality. A higher
quality setting will require more file storage space, but yield a more detailed video.
AUDIO
Select from two options:
ON Enable audio recording (If selected camera channel has a microphone connected)
OFF Disable audio recording of an audio Pickup equipped video source
SETUP MENU 1.3
'RECORD'
RECORD 1.3.5
'MIRROR'
MIRROR SETUP
1.3.5.1
Mobilemule™