Installation Manual

Reverse With Condence ™

BEFORE DRILLING

Please check that no cable or wiring is on the other side of the

wall. Please clamp all wires securely to reduce the possibility

of them being damaged while vehicle is in use. Keep all cables

away from hot or moving parts and electrical noisy components.

We recommend doing a benchmark test before installation

to insure that all components are working properly.

CABLE INSTALLATION

Step :

Be sure to position the cable properly. Rear View Safety cables use

aircraft grade connectors which means the cable can be exposed

to all weather elements. Do not run the cable over sharp edges, do

not kink the cable and keep away from HOT and rotating parts.

Step :

Fasten all cables and secure all excess cable.

MONITOR INSTALLATION

Step :

To Attach the Pedestal mount to the dashboard or to the headliner

use self-tapping screws and/or the adhesive pad.

Step :

Attach monitor to mount, and adjust mounting angle to allow

optimum driver viewing comfort. (See figure 1.1 on page 8)

BEFORE YOU BEGIN