Instruction Manual Digital Wireless Hitch Camera RVS-83112-BA Rear View Safety, Inc.
TABLE OF CONTENTS Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . 04-06 Before Beginning Installation . . . . . . . . . . . . . . . . . . . . . . . 07 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pairing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Notes. . . . . . . . . . . . . . . . . . . . . . . .
NOTE! Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. Congratulations on purchasing a Rear View Backup Camera System! With this manual you will be able to properly install and operate the unit. INTRODUCTION The Backup Camera System is intended to be installed as a supplement aid to your standard rear view mirror that already exists in your vehicle.
Please read the entire manual and follow the instructions and warnings carefully. Failure to do so can cause serious damage and or injury, including loss of life. Be sure to obey all applicable local traffic and motor vehicle regulations as it pertains to this product. Improper installation will void manufacturer’s warranty. SAFETY INFORMATION USAGE: 4 • The Rear View Camera System is designed to help the driver safely detect people and/or objects helping to avoid damage or injury.
INSTALLATION: • Electric shock or product malfunction may occur if this product is installed incorrectly. or disconnected wire may cause a fire. • If smoke or a burning smell is detected, disconnect the system immediately. • Do not install the monitor where it may obstruct drivers view or obstruct an air bag device. SAFETY INFORMATION • While installing the Rear View System be careful with the wire positioning in order to avoid wire • Use this product within the voltage range specified. Failure damage.
If you have questions about this product, contact: Rear View Safety 1797 Atlantic Avenue Brooklyn, NY 11233 Tel: 1.800.764.1028 SAFETY INFORMATION IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
Before Beginning Installation Place monitor away from direct sunlight, heat, and water/moisture. This product is made with intricate electronic components. Handle with care. Improper use may cause a malfunction. BEFORE BEGINNING INSTALLATION Firmly fix the lighter plug to cigarette lighter. Do not install the monitor where it may obstruct drivers view or an air bag. Do not attempt to service this product on your own. If the system has any problem, disconnect the power and contact customer service.
Features Wireless Transmission - 70ft of wireless range using a 2.4 GHZ transmitter/receiver Color Monitor - 3.5” LCD plugs into the vehicle’s cigarette lighter. Magnetic Camera Mount - camera mounts anywhere with no hardware! No Wiring - Plug & Play system is ready to use in under one minute. Waterproof Camera (IP68 Rating) - Can withstand all weather elements. FEATURES Six Infra-red Lights enable 30ft of vision on the darkest night. Built-in foam around lens eliminates infra-red glare.
Installation Place camera above hitch ball and push power button for 2 seconds on camera until you see a steady blue light (to power off camera hold power button down for 2 seconds) CAMERA AND MONITOR PLACEMENT Camera and Monitor Placement Monitor (plugs into cigarette lighter) Place between ball and hitch Reverse With Confidence ™ or behind trailer 9
Pairing INSTALLATION 1) Turn on camera. 2) Hold power button on camera for 6 seconds until led flashes blue. 3) Turn on monitor. 4) Push the pair button on monitor until PAIR OK is displayed. 5) Restart monitor. System is now PAIRED.
MONITOR SPECS display system display format display contrast display brightness viewing angle display color input voltage power consumption pixel count respond time CAMERA SPECS high quality cmos sensor NTSC: 580 x 492 PAL: 580 x 540 120° 6inra-redlghts 0 lux (IR-on) ip68 dc 8v - 12v (9v battery automatic 1.
ONE YEAR WARRANTY REAR VIEW SAFETY, INC. WARRANTS THIS PRODUCT AGAINST MATERIAL DEFECTS FOR A PERIOD OF ONE YEAR FROM DATE OF PURCHASE. WE RESERVE THE RIGHT TO REPAIR OR REPLACE ANY SUCH DEFECTIVE UNIT AT OUR SOLE DISCRETION. REAR VIEW SAFETY, INC. IS NOT RESPONSIBLE FOR A DEFECT IN THE SYSTEM AS A RESULT OF MISUSE, IMPROPER INSTALLATION, DAMAGE OR MISHANDLING OF THE ELECTRONIC COMPONENTS. REAR VIEW SAFETY, INC. IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES OF ANY KIND.
DISCLAIMER Reverse With Confidence ™ DISCLAIMER REAR VIEW SAFETY AND/OR ITS AFFILIATES DOES NOT GUARANTEE OR PROMISE THAT THE USER OF OUR SYSTEMS WILL NOT BE IN/PART OF AN ACCIDENT OR OTHERWISE NOT COLLIDE WITH AN OBJECT AND/OR PERSON. OUR SYSTEMS ARE NOT A SUBSTITUTE FOR CAREFUL AND CAUTIOUS DRIVING OR FOR THE CONSISTENT ADHERENCE TO ALL APPLICABLE TRAFFIC LAWS AND MOTOR VEHICLE SAFETY REGULATIONS.
If you have any questions about this product, contact: Rear View Safety, Inc. 1797 Atlantic Avenue Brooklyn, NY 11233 800.764.1028 Better Cameras. Better Service. IT’S OUR GUARANTEE.
