Manual

Reverse With Condence ™
11
REFLECTIVE FILM
Reective Film Installation
Follow these instructions if a double image appears when installed.
1.Place the mounting mat in the desired position on the dashboard
with the HUD on top.
2.Observe where the HUD reects & place the reective lm in posi-
tion.
A. Ensure the surface is clean and dry before installing the lm
B. Remove the back protective side marked (1) and attach the lm to
the clean windscreen
C. Once you’re satised with the location use a credit card or similar
object to remove any remaining air bubbles
D. Remove the front side marked (2), if you need to adjust the HUD’s
reection, reposition using the mounting mat