User's Manual

ManualsBrandsRWD INDUSTRIAL ManualsAudio EquipmentIFIDELITY NOISE REDUCTION WARP BLUETOOTH HEADPHONES



X5BT hi-fi hands-free Bluetooth Headset instructions

Dear Customer: Hello!

Welcome to use X5BT hi-fi hands-free Bluetooth Noise-cancelling

Headset,Please read instruction carefully before you use the equipment.

! Don’t use it in places near water.

! Don’t use it in places near heat sources.

! The sound is adjusted to the proper volume so as not to damage the health

and your equipment.

Brief introduction of X6BT high fidelity hands-free Bluetooth Headset

features

---------------------------------------------------------------------

1. Bluetooth mode

Wireless Bluetooth capable of receiving line audio transmission within

10M. And Headset reverse control part of Bluetooth devices such as play,

pause, next song selection, support iPhone, iPad (partial player software

does not support the reverse control). Telephone answering, Headset

switching, high fidelity voice,clear voice quality,no echo.

2.Call the hands-free function

Telephone answering, Headset switching, high fidelity voice, clear voice

quality,no reply.

3.The Line IN input function

Use the audio line and the Line in interface, can be depleted in the Headset

battery case to continue to listen to music.

4.Automatic back even, memory play function

Through this function can automatically return to the last successful

connect to Bluetooth devices and memory play before the shutdown of music

playback progress.

5.The Micro USB port charging function

Micro USB charging, convenient and simple.

6.Low battery alarm, shutdown function

Battery power is insufficient Headset have low battery alarm and automatic

shutdown function.

7.Noise-cancelling function

Open ON/OFF,reduce outside noise.

Interface / key function description

Summary of content (6 pages)

PAGE 1
X5BT hi-fi hands-free Bluetooth Headset instructions Dear Customer: Hello! Welcome to use X5BT hi-fi hands-free Bluetooth Noise-cancelling Headset,Please read instruction carefully before you use the equipment. ! Don’t use it in places near water. ! Don’t use it in places near heat sources. ! The sound is adjusted to the proper volume so as not to damage the health and your equipment.
PAGE 2
1.The previous song / volume + button Pairing in Bluetooth connection state, short a press to switch; long press (2seconds), the volume gradually increases, alarm and prompt after reaching the maximum. 2.The next song / volume - button Pairing in Bluetooth connection state, short press for a switch; long press (2seconds), the volume gradually reduced, as to the minimum volume will mute. 3.
PAGE 3
long press two seconds to rejected when you didn’t want to answer the phone. (blue, red indicator on the button below) 4.Line in interface. 5.Micro USB charging port 6.Noise-Cancelling ON/OFF Push down the switch ,indictor light shows green color for entering noise-cancelling mode The basic operating instructions: 1.
PAGE 4
2.Product weight: Headset parameters: 1 speaker diameter: 40MM. 2 The impedance: 16 ohm. 3 the rated audio output power: 5mW. 4 sensitivity: 106 ± 3DB. 5 Peak power output: ≤10mA Bluetooth Noise-cancelling parameters: 1.Frequency: 2.402GHZ-2.480GHZ; 2.Bluetooth technology: CSR4.0 3.The receiving sensitivity; -80dBm<0.1%BER; 4.The Straight line transport range: 10 meters; 5.Data transfer rate: 115200bps; 6.Operating power consumption: less than 45MA; 7.
PAGE 5
check the phone (for mobile phone audio) state, in order to hands free. 2.This product has the anti-interference design of anti Bluetooth signal, you can prevent the signal interference effectively; but there will still be interference on the products in the strong high-frequency and electromagnetic environment,should be appropriate to avoid the use of the product in such circumstances. 3.Bluetooth is a bidirectional transmission equipment, different users play end transmission distance will be affected.
PAGE 6
to prevent static electricity. 16.The actual range of the optic equipment obstacles between the surrounding magnetic field, microwave oven, electrostatic, receiver sensitivity,the performance of the antenna terminal operating system,software applications and other factors change. FCC Compliance: 1. This device complies with Part 15 of the FCC Rules.