Product Manual

* Instructions Reference Only
MAIL BACK
DRUG DISPOSAL PROGRAM
Pharmacist Approved
And Recommended
MADE IN USA
[phone] or email: [e-mail]
RxDestroyer.com
    
C2R Global Manufacturing, Inc. – The Exclusive Manufacturer of Rx Destroyer
™
701 Blackhawk Drive, Suit F • Burlington, WI 53105 • PHONE: [phone] • FAX : [phone] • EMAIL: [e-mail] • www.rxdestroyer.com
ATTENTION: Retain This Box For Return Shipment
INSTRUCTIONS FOR USE
*
PACKING THE SYSTEM SHIPPING THE SYSTEM
DO NOT THROW AWAY ANYTHING!
Each mail-back system contains:
Instructions for Use Insert
Rx Destroyer™ Hardener Packets
Plastic Liner & Zip Tie
“ORM-D” Label/Sticker
UPS Prepaid Shipping Label
1. Put the plastic inner liner inside container and secure
around edges.
2. Rell shipping box with used Rx Destroyer™ bottles.
Prior to shipping ensure bottles are:
a) Solidied with Hardener Packet(s)
b) Securely sealed with cap tightened.
3. Use the liner drawstring and plastic zip tie to ensure
the bag is sealed and water tight.
4. Remove old shipping labels/stickers and securely
seal/close box with shipping tape.
5. Ax the “ORMD” sticker on any side of the shipping box.
6. Ax prepaid shipping label on top of shipping box.
1. FOLLOW INSTRUCTIONS FOR PACKING THE
SYSTEM PRIOR TO SHIPPING.
2. NOTE: System can only be shipped through UPS
ground.
3. If you have a daily UPS pick-up service:
Hand the sealed and secured system to UPS driver.
4. If you do not have a daily UPS pick-up service:
- Hand the system to any UPS driver
- Schedule a UPS pick-up online at ups.com or
by calling 800-742-5877
5. Tracking information available post incineration to
registered email.
**Always follow facility, local, state, tribal, and federal rules and
regulations for safe drug disposal.