Owner`s manual

Installation

1) Remove the existing mirror and unplug a connector if exist. (Note: All

vehicles use different mounting solutions. If necessary, consult your local

automotive dealer or installation professional for specific instructions.)

2) Attach the vehicle-specific mounting stem (sold

separately) to the back of the mirror using the

supplied washers and screws, starting with the holes

nearest the top of mirror housing.

3) Mount the MN312S/MN312D using supplied screw.

Slide or twist it onto the factory mounting base and

carefully tighten the screw until secure.

4) Plug in the cigar lighter power connector to the car power outlet or if

necessary the unit can be hardwired for better appearance.