Specifications

Avolites Rolacue Operators Manual - page 15
rq96man 19/09/1996 18:30
You can then change Preset Bank and access a different Attribute of the
Fixtures.
For example, here is how an eight channel Intellabeam Moving Mirror light is
controlled. I have assumed that this is patched onto Handle 1 (Preset Faders
1/31).
Presets
Bank ‘A’ ‘B’
1 Dimmer -------
2 Iris Strobe
3 Tilt Pan
4 Colour -------
5 ------- -------
6 Gobo -------
7 ------- -------
8 Speed -------
Selecting Preset Bank 1 (LAMPS) and moving Preset Fader 1 will turn on the
Selected Dimmer channel.
Selecting Preset Bank 3 (PAN / TILT) and moving Preset Fader 61 on the
Sapphire or 31 on the Pearl will move the Pan axis of the mirror and moving
Fader 1 on the Sapphire or Pearl will alter the Tilt axis of the moving light.
Selecting Preset Bank 4 (COLOUR / COLOUR) and moving Fader 1 will
move the colour Wheel of the Fixture. As the device only has one colour
Wheel, moving Preset Fader 31/61 will have no effect.
3.4.7 Controlling Fixtures by typing in levels on the Keypad
This is probably most useful for controlling Intensities, but can be used to
control any Attribute.
• Press a Preset Bank button.
The LED lights up.
• Hold down the ADD or SWOP button of the channel you wish to control.
• Type in a percentage level on the Keypad.
• Press ENTER.
3.4.8 Using Wheels to control one Attribute and Preset Faders to control another
When you use the second method of controlling the Wheels, they become
connected not only to the Fixtures, but to the Attributes of the Preset Bank
which was active when you connected the Wheels.
You can now change Preset Bank and control another Attribute on the Preset
Faders, while retaining control of the first Attribute on the Wheels.
eg. If you connect the Wheels to the Pan and Tilt of a Fixture, you can go to
the LAMPS bank and use the Preset Faders to adjust the intensity of the
Fixture while moving the Pan and Tilt using the Wheels