Specifications

Avolites Rolacue Operators Manual - page 43
rq96man 19/09/1996 18:30
6.12 Using INCLUDE to program a Memory
As discussed in Section 4.3, How HTP and LTP Channels are recorded LTP
Channels output from the Playback area will not record in a new Memory (or
Chase Step) because they are not in the Programmer.
To put all the Channels from a Memory or Chase Step into the Programmer
to record elsewhere, you can use Include.
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
• If you want to Include a particular Chase Step, run the Chase and Stop it
on the step you want to Include.
Otherwise if its Playback Fader is down, or the Playback Fader is up and the Chase
is running, you will Include the last complete step of the Chase that was run.
• Press the blue MEMORY button on the Program Select bank. Its LED will
light up
.
• Press Softbutton D [INCLUDE A MEMORY OR CHASE STEP].
You can
Include more than one Memory or Chase Step by repeating this step as many times as
you wish.
• Press the Playback SWOP button of the Memory or Chase step you wish
to Include.
The Memory or Chase Step is put into the Programmer, and the Included
scene is added to the output.
• Make any further changes required for the Memory, then record it in the
normal way.
6.13 Using the RECORD STAGE function
6.13.1 Using Record Stage to build a Memory
Record Stage puts all the HTP Channels at the level at which they are
currently seen on stage into the Programmer to be recorded into a Memory or
Chase.
This does not put LTP Channels into the Programmer.
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
• Set up the stage look you wish to record.
• Press the blue MEMORY button on the Program Select bank.
Its LED will
light up
.
• Press Softbutton A [PRESS TO RECORD STAGE].
• Make any further changes required for the Memory, then record it in the
normal way.
6.13.2 Recording HTP Channels as seen on stage into a Memory being edited
HTP Channels are only recorded into a Memory which is being edited if they
have been turned on in the Programmer.
There may be occasions when it is desirable to take the HTP Channels being
output and record all of these into a previously recorded Memory. You can do
this using Record Stage.