Specifications

Avolites Rolacue Operators Manual - page 64
rq96man 19/09/1996 18:30
• Release the Preset Focus button.
8.6.2 The DIAGONAL COPY method
⇒ Remember a FOCUS uses a DIAGONAL connection, from the FOCUS
button to the SELECT button. Think of yourself as a patch lead between
the two.
8.7 Editing a Preset Focus
ALL THE FIXTURES IN THAT PRESET FOCUS WILL GO TO THEIR
PRESET FOCUS VALUES. THESE VALUES ARE PUT IN THE
PROGRAMMER PRIOR TO RE-RECORDING. See Section 1.5 The
Programmer.
8.8 Deleting a Preset Focus
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
• Press the blue DELETE button on the Program Select bank.
Its LED lights
up
.
• Press the Preset Focus button TWICE to delete it
. Delete LED will go out.
8.9 The pre-programmed Preset Focuses
When an instrument is patched using a Personality File a number of pre-
programmed Preset Focuses can be automatically loaded, by selecting YES
when the LOAD PRE-PROGRAMMED FOCUSES menu is presented prior to
patching an instrument.
⇒ You can only load the Pre-programmed Focuses at this time.
• Turn the Key to Program or Run in Take Over Run mode. See Section
12.1 Running your show
.
• Select the Preset Bank of the Attribute you wish to use.
• Press and hold down a previously recorded Preset Focus button.
• Check the Focus Mask is correctly set.
Lit LED’s in the Preset Bank buttons
indicate selected banks. Turn banks on and off by pressing the Preset Bank Buttons
.
• Whilst still pressing the Preset Focus button, press the Preset SWOP
button of the Fixture you wish apply the Preset Focus to.
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
• Select the appropriate Preset Bank.
• Press the blue EDIT FOCUS button on the Program Select Bank.
The
Focus Mask will be displayed on the Preset Bank LED’s. Lit LED’s in the Preset Bank
buttons indicate selected banks. Turn banks on and off by pressing the Preset Bank
Buttons.
• Press the Preset Focus for editing.
• Make the desired changes to the Preset Focus.
• Press the blue STORE FOCUS button on the Program Select bank.
• Press the same Preset Focus button to store the edits.