Operation Manual

6. Recording

6-1. Record with the built-in microphone

1) Press the INDEX button while the recorder is stopped to select the desired folder.

2) Press the ◎ REC/|| button to start recording. The record/play indicator light will be red. Point

the built-in microphone toward the sound source.

3) To pause recording, press the ◎ REC/|| button. The record/play indicator will blink, and

PAUSE will ash on the display.

Press the ◎ REC/|| button again to resume recording.

4) To stop recording, press the STOP/DEL button.

► Notes

• Set the desired voice activation function and recording mode before starting recording (Refer

to Menu settings on page 28 for details).

• Make a test recording to make sure that the Menu settings are correct.

• Press ▷｜｜ during recording to display the remaining recording time.

• Press ►►｜ during recording to create a new le.

• The maximum number of les in each folder is 400, for a total capacity of 2,000 les (400 les

× 4 folders, 400 les × 1 hidden folder).

• If the recording time exceeds the available capacity or the number of les reaches 2,000,

recording stops and ‘FULL’ will be displayed.

Delete a few recordings or move them to a computer.

• Do not remove the batteries during recording. This may cause the recorder to malfunction.

• If recording for a prolonged period of time, replace the batteries before beginning.

• The device can record while powered through a USB cable without draining the battery.

Connect the recorder to a computer using the USB cable and press the ◎ REC/|| button for 1

second or longer to start recording.