Operation Manual

20
6-8. Recording Telephone Conversation
6-9. Recording Clearly using Triple Built-in Microphones
The large signal-to-noise (S/N) ratio of the microphone picks up every detail of the human voice
to give superb sound reproduction.
Select Microphones according to recording purposes
1) In case of recording general meeting: Pull down a switch of the device to meeting direction.
Left & Right Microphones are activated to record.
2) In case of recording interview: Push up a switch of the device to interview direction. All Left,
Right & Center Microphones are activated to record.
• The digital telephone cannot be connected to the Voice recorder.
• To record only when you talk on the telephone, select Voice Activated Recording
and press REC button. (For details, refer to menu settings page)
• If Voice Activated Recording function does not work properly, set MIC sensitivity low.
(For details, refer to menu settings page)
• The input volume of recorded sound is affected by telephone and telephone line condition.
If input volume is too low, disable Voice Activated Recording function.
(For details, refer to menu settings page)