- Ryobi OPERATOR'S MANUAL BENCH GRINDER BGH826

ManualsBrandsRyobi Outdoor ManualsGrinderBGH826

SAVE THIS MANUAL FOR FUTURE REFERENCE

OPERATOR'S MANUAL

BENCH GRINDER

Model BGH826

THANK YOU FOR BUYING A RYOBI BENCH GRINDER.

Your new Bench Grinder has been engineered and manufactured to Ryobi's high standards for dependability, ease of

operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator's manual before using your new machine.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your grinder properly and only for

what it is intended, you will enjoy years of safe, reliable service.

Please fill out and return the Warranty Registration Card so we can be of future service to you.

Thank you again for buying Ryobi tools.

T TR

8” Bench Grinder

RYOBI TECHNOLOGIES, INC.

Anderson, SC 29625

1-800-525-2579

SER. No.

BGH615 120V AC 60Hz 2.1A 3600 RPM/TR/MN 1/2” Arbor

Por razones de seguridad, leer atentamente el Manual del Usuario antes de poner el

uso la máquina. Usar protección de seguridad para los ojos y discos de amolar aptos

para la velocidad de la máquina.

MADE IN CHINA

FABRIQUE AUX CHINA

FABRICADO EN CHINA

For Safe Operation, Read and Understand Operator's Manual Before Using Tool.

Wear Eye Protection. Always use Guards and use grinding wheels suitable for speed of grinder.

Avant utilisation, il faut lire et comprendre le manuel d’utilisation pour utiliser l’outil d’une

manière sûre. Il faut porter des lunettes de sécurité. Il faut toujours utiliser les carters

de protection et utiliser des meules appropriées pour le régime de la meuleuse.

AVE

E48467

43F1

0FF

Summary of content (14 pages)

PAGE 1
OPERATOR'S MANUAL BENCH GRINDER Model BGH826 er rind hG enc B 8” 0V r bo Ar der. grin l. 1/ 2”g Toospeed of e til d’un M N re Usin for R/ ual Befosuitable ser l’oucarters les M /T Manwheels r utili ser e. el RP rator's ding tion pou leus er s utili meu pon s 00 Ope grin ilisatoujour de la s de lar apto 36 erstandand use uel Ild’utfaut ime amo Und rds man . rég ario ante 2.
PAGE 2
TABLE OF CONTENTS ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Table of Contents .......................................................................................................................................... 2 Product Specifications .................................................................................................................................. 2 Rules for Safe Operation ...........................................................................................................................
PAGE 3
RULES FOR SAFE OPERATION Safe operation of this power tool requires that you read and understand this operator's manual and all labels affixed to the tool. Safety is a combination of common sense, staying alert, and knowing how your bench grinder works. READ ALL INSTRUCTIONS ■ KNOW YOUR POWER TOOL. Read the operator's manual carefully. Learn the applications and limitations as well as specific potential hazards related to this tool.
PAGE 4
RULES FOR SAFE OPERATION ■ NEVER reach to pick up a workpiece, a piece of scrap, or anything else that is in or near the grinding path of the wheel. ■ AVOID AWKWARD OPERATIONS AND HAND POSITIONS where a sudden slip could cause your hand to move into the wheel. ALWAYS make sure you have good balance. ■ NEVER stand or have any part of your body in line with the path of the wheel. ■ DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.
PAGE 5
RULES FOR SAFE OPERATION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs.
PAGE 6
ELECTRICAL EXTENSION CORDS ELECTRICAL CONNECTION Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool's plug. When using a power tool at a considerable distance from the power source, use an extension cord heavy enough to carry the current that the tool will draw. An undersized extension cord will cause a drop in line voltage, resulting in a loss of power and causing the motor to overheat.
PAGE 7
UNPACKING ■ Carefully remove all parts from the shipping carton. ■ Lift the bench grinder from the carton and place it on a level work surface. ■ Do not discard the packing materials until you have carefully inspected the machine, identified all loose parts, and satisfactorily operated your bench grinder. ■ Examine all parts to make sure no breakage or damage has occurred during shipping. ■ If all parts have been included, proceed to assembly.
PAGE 8
FEATURES KNOW YOUR BENCH GRINDER WORK REST See Figure 3. Before attempting to use your new tool, familiarize yourself with all operating features and safety requirements. Carefully read this operator’s manual before using your grinder. The work rests are independently adjustable to compensate for wheel wear. Before grinding, make certain the work rests are adjusted properly. Generally the object being ground is done slightly above center of the grinding wheel.
PAGE 9
ASSEMBLY SPARK DEFLECTOR WARNING: WASHER Always disconnect the bench grinder from the power source before performing any assembly or adjustment. Failure to do so could result in accidental starting resulting in possible serious personal injury. SCREW SPARK DEFLECTOR LOCK WASHER der Grin ch Ben ” 8 r bo er. Ar grind . 1/ 2” Tool d of e N Using spee d’un /M re ble for l’outilers TR ual Befosuita er cart M/ 's Manwheels r utiliser lese.
PAGE 10
ASSEMBLY MOUNTING SAFETY SHIELDS See Figures 6. Mount the left and right shield rods to the inside of the wheel guards using the clamp brackets, hex bolts (8 mm x 14 mm), and washers (8 mm). CLAMP BRACKET WASHER HEX BOLT Use the illustration as a guide to determine which shield rod is mounted on the left and which shield rod is mounted on the right of the grinder. SHIELD ROD r nde Gri ch Ben 8” 12 0V r bo er. ” Ar.
PAGE 11
OPERATION WARNING: Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save this operator's manual and review frequently for continuing safe operation and instructing others who may use this tool. er rind hG enc B 8” V-GROOVE r bo er. Ar grind l.
PAGE 12
OPERATION CHISELS AND SCREWDRIVER BLADES See Figure 10. When sharpening chisels and screwdrivers, work rest should support the chisel at the correct angle against the wheel. der Grin ch Ben 8” WARNING: 12 r bo er. ” Ar. grind 1/2 Tool d of e N Using spee d’un /M re ble for l’outil rs TR ual Befosuita utiliserles carte M/ 's Manwheels er e.
PAGE 13
MAINTENANCE WARNING: 10 WATT, 12 VOLT WORKLIGHT BULB When servicing, use only identical Ryobi replacement parts. Use of any other part may create a hazard or cause product damage. GENERAL Keep the bench grinder clean. Remove dust from working parts and beneath the grinder frequently. Make sure the bench grinder operates properly. Check screws, nuts, and bolts for tightness. EXTENSION CORDS TO REMOVE BULB The use of any extension cord will cause some loss of power.
PAGE 14
OPERATOR'S MANUAL Bench Grinder Model BGH826 EXTENSION CORD CAUTION **Ampere rating When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords should be used.