Manual

ManualsBrandsRyobi ManualsAccessories for video4070331

SAVE THIS MANUAL FOR FUTURE REFERENCE

OPERATOR'S MANUAL

#4070331 DADO THROAT PLATE

(FOR USE WITH THE BT3000 AND BT3100

TABLE SAWS)

Your Dado Throat Plate has been engineered and manufactured to Ryobi's high standards for dependability, ease of

operation, and operator safety.

WARNING: To reduce the risk of injury, the user must read and understand the operator's manual.

Thank you for buying a Ryobi tool.

Summary of content (6 pages)

PAGE 1
OPERATOR'S MANUAL #4070331 DADO THROAT PLATE (FOR USE WITH THE BT3000 AND BT3100 TABLE SAWS) Your Dado Throat Plate has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual. Thank you for buying a Ryobi tool.
PAGE 2
RULES FOR SAFE OPERATION ■ DO NOT USE THIS PRODUCT WITH OTHER EQUIPMENT or for other purposes. ■ ALWAYS DISCONNECT THE SAW FROM THE POWER SUPPLY BEFORE ASSEMBLING THIS KIT. Make sure the switch is off when reconnecting the saw to a power supply. ■ BEFORE MAKING A CUT, BE SURE ALL ADJUSTMENTS ARE SECURE. ■ SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct other users. If you loan someone this product, also loan these instructions.
PAGE 3
UNPACKING INFORMATION LOOSE PARTS LIST ■ Remove the loose parts from the box. ■ Inspect the dado throat plate carefully to make sure no breakage or damage occurred during shipping. ■ If the dado throat plate is damaged, please call 1-800-525-2579 for assistance. 1. Dado throat plate 2. 10-24 x 34 in. flat head screws (3) TOOLS NEEDED Phillips head screwdriver WARNING: If any parts are missing, replace the missing parts before assembling the kit. Failure to do so could result in serious personal injury.
PAGE 4
ASSEMBLY Read these instructions completely before mounting the dado throat plate on the saw. BLADE GUARD WARNING: The table saw should never be connected to a power supply when you are assembling or disassembling parts. Disconnecting the table saw will prevent accidental starting that could cause serious personal injury. RIVING KNIFE Use the two wrenches supplied with the saw. ■ Unplug the saw. ■ Remove the original throat plate from the saw.
PAGE 5
ASSEMBLY Install dado throat plate: ■ Lower the dado blade and secure the dado throat plate with the three screws provided. Locate the first threads very carefully to avoid stripping. See Figure 3. ■ Rotate the dado blade by hand to make sure it is turning freely and does not contact the saw or throat plate. ■ Make sure the switch is in the OFF position. Reconnect the saw to power supply to begin operation. ■ Always use push blocks when making dado cuts to avoid the risk of serious injury.
PAGE 6
OPERATOR'S MANUAL #4070331 DADO THROAT PLATE (FOR USE WITH THE BT3000 AND BT3100 TABLE SAWS) WARRANTY Ryobi warrants its accessories for a period of 90 days from the date of purchase. Batteries and chargers are warranted for a period of two years from the date of purchase. PARTS AND SERVICE For parts or service, contact your nearest Ryobi authorized service center. Be sure to provide all relevant information when you call or visit.