Manual

Engine Type ................................................................. Air-Cooled, 2-Cycle

Stroke ...................................................................... 1.25 in. (31.75 mm)

Displacement ................................................................... 1,9 cu in. (31 cc)

Clutch Type ........................................................................ . Centrifugal

Idle Speed RPM ................................................................. 2,800-3,600 rpm

Operating RPM (Trimmer) ......................................................... 7,200-8,300 rpm

Ignition Type ......................................................................... Electronic

Ignition Switch ......................................... ,............................. Slide Switch

Spark Plug Gap ................................................................ 0.020 in. (0.5 mm)

Lubrication ......................................................................... Fuel/Oi! Mixture

Fuel/Oil Ratio .............................................................................. 32:1

Carburetor ................................................................ Diaphragm, All-Position

Starter ............................................................................ Auto Rewind

Muffler ....................................................................... Baffled with Guard

Throttle .................................................................... Manual Spring Return

Fuel Tank Capacity ................................................................ 12 oz. (355 ml)

Drive Shaft Housing .......................................................... Steel Tube, Click-Link

Throttle Control ................................................................. Finger-Tip Trigger

Unit Weight (No fuel, with cutting attachment, cutting attachment shield and J-handle) ........ 12,25 Ibs. (5.6 kg)

Cutting Mechanism ............................................. SpeedSpool Dual String Cutting Head

Shoulder Strap ............................................. _........................... Optional

Line Spool Diameter ............................................................... 3 in (76.2 mm)

Trimming Line Diameter ......................................................... 0.060 in (2.03 mm)

Cutting Path Diameter ............................................................. 15 in. (38.1 cm)

Unit Weight (Add*On only) ........................................................ 5.25 Ibs. (2.36 kg)

Cutting Depth (maximum) .......................................................... 2.5 in. (63.5 mm)

Wheel Diameter ............................................................... 3.75 in (95.25 ram)

Gearbox Ratio .......................................................................... 1.25:1