Use and Care Manual

6 - English
NOTE: Depending on your device’s settings, the laser
angle line may blink and/or the laser beam may turn on
when the desired angle is achieved.
SETTING THE ANGLE
 Touching the screen and sliding up or down will allow
you to set the green desired-angle line.
 Tapping the red arrows at the right side of the green
desired-angle number allows movement up or down in
1-degree increments.
 To reset the desired angle to 0°, double-tap the green
number displayed on the left side of the screen.
TAKING A PICTURE
The RYOBI
™
Phone Works™ app allows you to take a pic-
ture of the screen to save for future reference or share via
email or social media. This function captures all settings
displayed on the current screen. It will work with or without
activating the smartphone’s built-in camera.
 Tap the appropriate camera icon.
 Tap the large green button to take the picture on the
screen.
 The picture just taken will appear on the screen.
 To save, swipe the picture toward the file cabinet.
 To delete, swipe downward and the picture will be
deleted.
NOTE: Pictures will be saved into the project name at
the top right of the screen. To save into another project,
see Managing Your Projects below.
 Multiple pictures can be saved into each project.
MANAGING YOUR PROJECTS
See Figure 4.
To edit, delete or share your images:
Tap the project name. A menu appears displaying Add New,
Edit, Use Existing or Cancel.
Add New
 Tap Add New and enter the name of your new project.
 Tap Done to return to the screen. Any screen shots
or images saved will be stored under this new project
name.
 To review images, tap the file cabinet icon. Tap the im-
age to display the saved screenshot.
NOTE: If no images have been saved, you will receive a
notice that no readings are available in this project. You
must save an image before you can open to review.
Edit
 Delete or add characters in the open project name and
type in a new or revised name for your project.
OPERATION
Use Existing
 Scroll through the list of project names and select the
one you wish to access.
 Tap Done to load the project.
CREATING NOTES
Tap the notes icon in the top right corner of the projects
screen. A menu appears displaying Photos, Audio Memo,
Location and Notes.
 Tap plus (+) for Photos to take a picture in the selected
project or view current photos.
 Tap plus (+) for Audio Memo to record a voice memo of
up to two minutes in the selected project. Tap the green
button to begin recording. Tap again to stop.
 Tap plus (+) for Location and select Use Current Lo-
cation to record your current location in the selected
project. To edit or manually enter the location, tap plus
(+) again to access the keyboard.
 Tap plus (+) for Notes to access the notes screen. Tap
plus (+) again to access the keyboard.
SHARING NOTES
 Select the share icon .
 Select the share icon on each piece of data you
wish to share.
 Select the share method.
App images may vary.
0°
Current angle of the projected
laser beam
Reference laser angle line
(current angle of laser)
0°
Desired angle being searched
Adjust desired-angle line in
one-degree increments
Laser is on or off
Fig. 3
Fig. 4