ESR2400A
1 ESR-2400A 240V 50Hz • 2400W 11 RYOBI AUSTRALIA.
-2-
English Maintain tools with care. Keep the blades sharp and the exit shoot clean for better and safer performacnce. Follow instructions for changing accessories. Do not use the shredder if it is damaged in anyway. GENERAL SAFETY RULES CAUTION! Read and understand these instructions. When using garden tools observe them to protect against electric shock, risk of fire and serious injury. Read these instructions before using the shredder and keep them in a safe place for future reference.
English SYMBOLS Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool more safely and effectively. SYMBOL 50' 15m NAME EXPLANATION Safety Alert Precautions that involve your safety. Ricochet Thrown objects can cause severe injury. Wear protective clothing and boots.
English SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTRE for repair. When servicing, use only identical replacement parts. Disconnect tools, when not in use before servicing and changing accessories. Maintain tools with care. STAY ALERT Keep cutting tools sharp and clean for better and safer performance. Follow instructions for changing accessories.
English GETTING STARTED SPARE PARTS Check that the shredder is properly assembled. 1. hopper 2. body 3. motor and blades 4. plunger 5. stand 6. complete wheel 7. axle 8. power plug 9. overload switch 10.switch on/off 11. securing knob Place the shredder on a level and a firm surface to prevent it topping over. If working on soft ground, rest the shredder on a board. Check that the extension lead is safe and the safety plug is plugged into the MAINS SOCKET.
English Do not try to force branches in that are too large for the machine. The blades tend to pull the branches into the shredder but finer material such as leaves may need to be pushed through with the plunger. If the machine is overloaded, an overload protection switch will cut the shredder off-leave it for about 5 minutes and try again it should then start. (See Fig. 6) Place the collecting bag, a bucket or small bin under the chute to collect the shredding in.
RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD. GUARANTEE Subject to the guarantee condition below, this Ryobi tool (hereinafter called “the product”) is guaranteed by Ryobi (hereinafter called “the Company”) to be free from defects in material or workmanship for a period of 24 months from the date of original purchase covering both parts and labour. Under the terms of this guarantee, the repair or replacement of any part shall be the opinion of the Company or its authorised agent.
