Use and Care Manual

39 - English
OPERATION
Fig. 67
USING THE INDOOR KEYPAD
See Figure 67.
Install and wire the indoor keypad as described earlier in
the Installation section.
To raise or lower the garage door, press and release the
UP/DOWN button.
To lock or unlock a closed garage door, press and release
the LOCK button. When the garage door is locked, it can
only be controlled using the indoor keypad. A locked
garage door cannot be opened or unlocked with a remote,
outdoor keypad, or smart phone.
To turn the LED light on and off, press and release the
LIGHT button.
NOTE: When the light button is pressed, the LED lights
will illuminate for four minutes.
Up/Down
Button
Light
Button
Lock
Button
Module
Port #7
Module
Port #1
AC
Receptacle
AC
Receptacle
Module
Port #4
Module
Port #3
Module
Port #2
Module
Port #6
Module
Port #5
Activating and Deactivating DC Module Ports:
To activate a DC module port, press the number on the
indoor keypad corresponding with the desired port. For
example, to activate module port #1 press NUMBER 1
on your keypad.
NOTE: Multiple ports can be activated at once.
When a module port is activated, the corresponding
number on the indoor keypad will light up and the port
can be used to power DC modules.
To deactivate a DC module port, press the number on
the indoor keypad corresponding with the port.