Use and Care Manual

17 - English
Pull the front pulley and belt to the top of the rail assembly.
Turn the tension nut on the pulley rod counterclockwise
to loosen. Remove the tension nut and spring from the
pulley rod.
Move the front pulley back into the rail assembly.
Insert the edge of the front brace into the front rail. Slide
together until brace clicks in place. If you cannot get the
Sleeve
Sleeve
Pulley
Rod
Tension
Nut
Spring
Fig. 15
Fig. 13
Fig. 14
Fig. 16
Intermediate
Rail
Front
Rail
Front
Rail
Front
Rail
Front
Pulley
Front
Pulley
Front
Brace
ASSEMBLY
Spring
Fig. 17
Fig. 18
Tension
Nut
Front
Brace
Pulley
Rod
Tension
Nut
Spring
Front
Brace
brace to fit by hand, try gently tapping it with a rubber
mallet until it is snug.
Pull the front pulley forward and slide the rod through the
hole in the brace.
Install spring and tension nut onto pulley rod.
Move the inner and outer trolley to the middle of the rail
assembly.
Front
Rail