Warranty

34 - English
Top
Screw
Bottom
Screw
INSTALLING THE OUTDOOR KEYPAD
See Figures 62 - 64.
Locate the following items:
Outdoor Keypad
Screws (1.5 in., Phillips Hd.) [2]
WARNING:
Do not use garage door opener if keypads or remotes
do not start and stop the motor. An opener that cannot
be controlled with a keypad or remote is dangerous,
can result in death or serious personal injury, and must
be repaired.
WARNING:
Make sure the keypad is mounted high enough to prevent
unauthorized activation of the garage door opener. It
should be placed at least five feet above the floor so that
it is inaccessible to children. Unauthorized activation of
the opener can result in death or serious personal injury.
WARNING:
Do not start or stop the garage door opener if there is a
person or object in the path of the door, the door has not
been properly balanced, or if you cannot see the doorway.
Failure to follow these instructions can result in death or
serious personal injury.
NOTE: Program the outdoor keypad and ensure that it will
operate the garage door opener from your desired location
prior to installing it. See Programming the Outdoor Keypad
in the Operations section.
Find desired location outdoors and in sight of the garage
door.
NOTE: The keypad should be at least five feet above the
floor so it is inaccessible to children.
Use a pencil to mark screw hole placement and install
top screw.
Place the wide portion of the key hole over the head of
the top screw.
Slide the keypad down until the top screw is inside the
narrow portion of the key hole.
Remove the battery cover and 9-volt battery.
Use a level to be sure the keypad is in a vertical position,
then install bottom screw into the screw hole.
Install 9-volt battery.
Fig. 63
Fig. 64
Key
Hole
Battery
Cover
Battery
Screwdriver
Pencil
Outdoor
Keypad
Fig. 62
Screw
Hole
INSTALLATION
Replace battery cover.
For programming instructions, see Programming the
Outdoor Keypad in the Operations section.