Use and Care Manual

24 - English

ATTACHING RAIL ASSEMBLY TO HEADER

BRACKET

See Figure 32.

Locate the following items:

Large Clevis Pin

Hitch Pin

Place the power head on top of a prop or on the ground

with a towel or packaging material beneath it.

Power

Head

Clevis

First

Hole

Header

Bracket

Hitch

Rail

Assembly

Angle the rail assembly so that it rests against the header

bracket.

NOTE: If a door spring or other obstruction is in the way,

have someone hold the garage door opener or help to

balance it on a raised support while you position the rail

assembly.

Align the holes in the bracket with the holes in the rail

assembly as shown.

Insert large clevis pin and secure with hitch pin.

NOTE: The hitch pin should be installed into the first hole

closest to the head of the pin.

INSTALLATION

Fig. 32