Use and Care Manual

29 - English
Sectional
Door
Sectional
Door
Sectional
Door
Sectional
Door
Fig. 45
Fig. 47
Fig. 48
Fig. 46
CONNECTING DOOR BRACKET TO OUTER
TROLLEY
See Figures 45 - 50.
Locate the following items:
Curved Door Arm
Straight Door Arm
Medium Clevis Pin
Small Clevis Pin
Hitch pins (2)
Bolts (1/2 in. x 1 in.) [2]
Lock Nuts (1/2 in.) [2]
To connect sectional doors:
Lower the garage door completely.
Pull the emergency release rope down and slide outer
trolley toward the garage door.
Secure straight door arm to the rear of the outer trolley
using medium clevis pin and hitch pin.
Secure curved door arm to the door bracket using small
clevis pin and hitch pin.
Bring the curved and straight arms together. Choose two
sets of aligned holes and install bolts and nuts. Tighten
bolts and nuts with a 1/2 in. socket.
NOTE: For better rigidity, install fasteners in holes that
are as far apart as possible.
NOTE: If the holes in the arm do not align, remove the
straight door arm and reattach it in the reverse position.
If the straight door arm hangs too low after assembly,
you can shorten the length of the arm by cutting off up
to 6 inches.
Curved
Door Arm
Hitch Pin
Hitch Pin
Clevis Pin
Clevis
Pin
Straight
Door Arm
Bolt
Lock
Nut
Emergency
Release Rope
Outer
Trolley
INSTALLATION