Operator`s manual

OPERATION

Fig. 10

Fig. 11

Fig. 12

TO LOOSEN TO TIGHTEN

SCROLLING

KNOB LOCK

SCROLL CUTTING

See Figures 10, 11, and 12.

The scroll cutting feature is designed to permit 360° rotation

of the saw blade so that intricate designs may be cut with

minimum effort.

n Set the orbit adjustment to “0”.

n� Loosen the base locking lever as shown in figure 10.

n� Slide the base back to move the blade-support roller out

of the way of the saw blade as shown in figure 11.

�n Retighten the base locking lever.

�n Unlock the scrolling mechanism of your saw by sliding

the scrolling knob lock, located on the front of the jig saw,

to the right.

n� Rotate the scrolling mechanism with your free hand as

you apply pressure in the direction of the cut with your

other hand as shown in figure 12.

NOTE: The laser guide will not rotate with the scrolling

mechanism.