OPERATOR’S MANUAL MANUEL D’UTILISATION MANUAL DEL OPERADOR 18 VOLT STRING TRIMMER/EDGER 18 V TONDEUSE À FOUET/TAILLE-BORDURE 18 V RECORTADORA DE HILO/ RECORTADORA DE BORDES P2006 ACCEPTS ALL ONE+ BATTERY PACKS BATTERIES AND CHARGERS SOLD SEPARATELY COMPATIBLE AVEC TOUS LE BLOC-PILES ONE+ PILE ET CHARGEUR VENDUS SÉPARÉMENT ACEPTA TODOS LOS PAQUETES DE BATERÍAS ONE+ LAS BATERÍAS Y EL CARGADOR SE VENDEN POR SEPARADO Your trimmer has been engineered and manufactured to our high standard for dependability, eas
Fig. 4 See this fold-out section for all the figures referenced in the operator’s manual. A Voir que cette section d’encart pour toutes les figures a adressé dans le manuel d’utilisation. Vea esta sección de la página desplegable para todas las figuras mencionó en el manual del operador. Fig. 1 Fig. 2 B A - Latches (loquets, pestillos) D A C C Fig.
Fig. 8 Fig. 11 B Fig. 15 PROPER EDGING OPERATING POSITION POSITION D’UTILISATION CORRECTE POUR COUPE-BORDURES POSICIÓN CORRECTA PARA EL MANEJO DE LA CORTAR BORDES A B C A A - Black button (bouton noir, botón negro) B - Line (ligne, hilo) Fig.
TABLE OF CONTENTS TABLE DES MATIÈRES / ÍNDICE DE CONTENIDO Introduction....................................................................................................................................................................... 2 Introduction / Introducción Important Safety Instructions.........................................................................................................................................
IMPORTANT SAFETY INSTRUCTIONS WARNING! When using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. READ ALL INSTRUCTIONS For safe operation, read and understand all instructions before using this product. Follow all safety instructions. Failure to follow all safety instructions listed below, can result in serious personal injury. Do not allow children or untrained individuals to use this unit.
IMPORTANT SAFETY INSTRUCTIONS Make sure all guards, straps, deflectors and handles are properly and securely attached. Use only the manufacturer’s replacement line in the cutting head. Do not use any other cutting attachment, for example, metal wire, rope, or the like. To install any other brand of cutting head to this string trimmer can result in serious personal injury. Never operate unit without the grass deflector in place and in good condition.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
FEATURES PRODUCT SPECIFICATIONS Motor....................................................................... 18 V DC Cutting Swath......................................................... 10-12 in. Weight (without battery pack)......................................4.6 lb. Replacement Spool Part Number...................... AC14RSLA Line Size..................................................................0.065 in. Replacement Spool Cap Part Number.................
ASSEMBLY UNPACKING WARNING: This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation.
OPERATION WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: To avoid serious personal injury, always remove the battery pack and keep hands clear of the lock-out button when carrying or transporting the tool. STARTING/STOPPING THE STRING TRIMMER WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1.
OPERATION Keep a firm grip with both hands while in operation. Trimmer should be held at a comfortable position with the rear handle about hip height. Cut tall grass from the top down. This will prevent grass from wrapping around the boom housing and string head which may cause damage from overheating. If grass becomes wrapped around the string head: Remove the battery pack. Remove the grass.
MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage. Install the new spool so that the line and slot align with the eyelet in the string head. Thread the line into the eyelet. Pull the line extending from the string head so the line releases from the slot in the spool. Reinstall the spool retainer by depressing tabs into slots and pushing down until spool retainer clicks into place.
TROUBLESHOOTING PROBLEM Line will not advance when using the auto-feed head POSSIBLE CAUSE SOLUTION Line is welded to itself. Lubricate with silicone spray. Not enough line on spool. Install more line. Refer to Line Replacement earlier in this manual. Line is worn too short. Pull line while pressing button. Line is tangled on spool. Remove line from spool and rewind. Refer to Line Replacement earlier in this manual.
WARRANTY LIMITED WARRANTY STATEMENT Techtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBI® brand outdoor product is free from defect in material and workmanship and agrees to repair or replace, at Techtronic Industries North America, Inc.’s, discretion, any defective product free of charge within these time periods from the date of purchase.
NOTES 13 — English
INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ AVERTISSEMENT ! Lors de l’utilisation d’outils de jardinage, toujours suivre les consignes de sécurité de base pour éviter les risques d’incendie, d’électrocution et de blessures. LIRE TOUTES LES INSTRUCTIONS Pour travailler en toute sécurité, lire et veiller à bien comprendre toutes les instructions avant d’utiliser ce produit. Respecter toutes les instructions de sécurité.
INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ fonctionner normalement et remplir son rôle. Vérifier l’alignement des pièces mobiles, détecter les pièces mobiles grippées ou les pièces rompues, un assemblage déficient ou toute autre condition pouvant affecter la sécurité d’utilisation. Un protecteur ou une autre pièce endommagé(e) doit être réparé convenablement ou remplacé par un centre d’entretien agréé afin d’éviter des blessures corporelles.
SYMBOLES Les termes de mise en garde suivants et leur signification ont pour but d’expliquer le degré de risques associé à l’utilisation de ce produit. SYMBOLE SIGNAL SIGNIFICATION DANGER: Indique une situation extrêmement dangereuse qui, si elle n’est pas évitée, aura pour conséquences des blessures graves ou mortelles. AVERTISSEMENT : Indique une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner des blessures graves ou mortelles.
CARACTÉRISTIQUES FICHE TECHNIQUE Moteur .................................................................18 V C.C. Poids (sans pile).................................................2 kg (4,6 lb) Largeur de coupe ..................... 254 à 305 mm (10 à 12 po) Diamètre de ligne.................................. 1,65 mm (0,065 po) Numéro de pièce de la bobine de remplacement... AC14RSLA VEILLER À BIEN CONNAÎTRE LA TONDEUSE À FOUET DÉFLECTEUR D’HERBE Voir la figure 1.
ASSEMBLAGE DÉBALLAGE Ce produit nécessite un assemblage. n Avec précaution, sortir l’produit et les accessoires de la boîte. S’assurer que toutes les pièces figurant sur la liste de contrôle sont incluses. AVERTISSEMENT : Ne pas utiliser le produit si, en le déballant, vous constatez que des éléments figurant dans la Liste de contrôle d’expédition sont déjà assemblés. Certaines pièces figurant sur cette liste n’ont pas été assemblées par le fabricant et exigent une installation.
UTILISATION DESMONTAJE DEL PILE AVERTISSEMENT : Ne pas laisser la familiarité avec l’produit faire oublier la prudence. Ne pas oublier qu’une fraction de seconde d’inattention peut entraîner des blessures graves. Voir la figura 4. Appuyer sur les loquets de chaque côté du piles. Retirer le bloc de piles. AVERTISSEMENT : AVERTISSEMENT : Toujours porter une protection oculaire avec écrans latéraux certifiée conforme à la norme ANSI Z87.1.
UTILISATION S’assurer que la tête du taille bordures est bien verrouillée avant de réinstaller la pile. UTILISATION DE LA TONDEUSE À FOUET Voir la figure 9. Suivre ces conseils lors de l’utilisation de la tondeuse à fouet : Tenir la tondeuse à fouet avec la main droite sur la poignée arrière et la main gauche sur la poignée avant. Garder une prise ferme sur les deux poignées pendant le fonctionnement.
ENTRETIEN AVERTISSEMENT : Utiliser exclusivement des pièces d’origine pour les réparations. L’usage de toute autre pièce pourrait créer une situation dangereuse ou endommager l’produit. AVERTISSEMENT : Toujours porter une protection oculaire avec écrans latéraux certifiée conforme à la norme ANSI Z87.1. Si cette précaution n’est pas prise, des objets peuvent être projetés dans les yeux et et d’autres lésions graves.
DÉPANNAGE PROBLÈME Le ligne n’avancera pas si une tête à avance automatique est utilisée CAUSE POSSIBLE Ligne soudée sur elle-même. SOLUTION Lubrifier avec un produit au silicone. Pas assez de ligne sur la bobine. Installer une nouvelle ligne. Voir Remplacement de ligne, plus haut dans ce manuel. Ligne trop courte. Tirez la ligne tout en appuyant sur le bouton. Ligne emmêlée sur la bobine. Retirer la ligne du de la bobine et la rembobiner. Voir Remplacement de la ligne, plus haut dans ce manuel.
GARANTIE ÉNONCÉ DE LA GARANTIE LIMITÉE Techtronic Industries North America, Inc., garantit à l’acheteur original que ce produit RYOBI® est exempt de tous vices de matériaux ou de fabrication et s’engage à réparer ou remplacer gratuitement, à son choix, tout produit s’avérant défectueux au cours des périodes indiquées ci-dessous, à compter de la date d’achat. B.
NOTES 13 — Français
INSTRUCCIONES DE SEGURIDAD IMPORTANTES inflamables. Las herramientas eléctricas generan chispas que pueden encender el polvo y los vapores inflamables. ¡ADVERTENCIA! Al utilizar herramientas eléctricas para el cuidado del jardín, con el fin de reducir el riesgo de incendio, descargas eléctricas y lesiones corporales, siempre deben seguirse ciertas medidas básicas de precaución. LEA TODAS LAS INSTRUCCIONES Para la operación segura, lea y entienda todas las instrucciones antes de usar este producto.
INSTRUCCIONES DE SEGURIDAD IMPORTANTES partes móviles, que no haya atoramiento de partes móviles, que no haya piezas rotas, el montaje de las piezas y cualquier otra condición que pudiera afectar su funcionamiento. Toda protección o pieza que esté dañada debe repararse apropiadamente o reemplazarse en un centro de servicio autorizado para evitar todo riesgo de lesiones. Asegúrese de que todas las protecciones, correas, mangos y deflectores de hierba estén acoplados debidamente y de manera segura.
SÍMBOLOS Las siguientes palabras de señalización y sus significados tienen el objeto de explicar los niveles de riesgo relacionados con este producto. SÍMBOLO SEÑAL SIGNIFICADO PELIGRO: Indica una situación peligrosa inminente, la cual, si no se evita, causará la muerte o lesiones serias. ADVERTENCIA: Indica una situación peligrosa posible, la cual, si no se evita, podría causar la muerte o lesiones serias.
CARACTERÍSTICAS ESPECIFICACIONES Motor .....................................................................18 V c.c. Ancho de corte.......................254 a 305 mm (10 a 12 pulg.) Peso (sin paquete de baterías)........................ 2 kg (4,6 lbs.) Núm. pieza del carrete de repuesto................... AC14RSLA Diámetro del hilo............................... 1,65 mm (0,065 pulg.) Núm. pieza de la tapa del carrete de repuesto....
ARMADO DESEMPAQUETADO Este producto requiere armarse. n Extraiga cuidadosamente de la caja la producto y los accesorios. Asegúrese de que estén presentes todos los artículos enumerados en la lista de empaquetado. ADVERTENCIA: Si hay piezas dañadas o faltantes, no utilice esta producto sin haber reemplazado las piezas dañadas o faltantes. La inobservancia de esta advertencia puede causar lesiones graves.
FUNCIONAMIENTO ADVERTENCIA: No permita que su familarización con las herramientas lo vuelva descuidado. Tenga presente que un descuido de un instante es suficiente para causar una lesión grave. EXTRACCIÓN DEL PAQUETE DE BATERÍAS Vea la figura 4. Oprima los pestillos laterales del paquete de baterías. Retire el paquete de baterías. ADVERTENCIA: ADVERTENCIA: Siempre póngase protección ocular con protección lateral con la marca de cumplimiento de la norma ANSI Z87.1.
FUNCIONAMIENTO MANEJO DE LA RECORTADORA Vea la figura 9. Siga las siguientes recomendaciones a manejar la recortadora de hilo: Sujete la recortadora con la mano derecha en el mango trasero y la izquierda en el delantero. Sujete firmemente la unidad con ambas manos durante la operación. Se recomienda sujetar la recortadora en una posición cómoda, con el mango trasero a la altura de la cadera aproximadamente. Corte la hierba alta desde arriba hacia abajo.
MANTENIMIENTO ADVERTENCIA: Al dar servicio a la unidad, sólo utilice piezas de repuesto idénticas. El empleo de piezas diferentes podría causar un peligro o dañar el producto. ADVERTENCIA: Siempre póngase protección ocular con protección lateral con la marca de cumplimiento de la norma ANSI Z87.1. La inobservancia de esta advertencia puede permitir que los objetos lanzados hacia los ojos y otros provocarle lesiones graves.
CORRECCIÓN DE PROBLEMAS PROBLEMA El hilo no avanza cuando se usa el cabezal con alimentación automática CAUSA POSIBLE SOLUCIÓN El hilo se pegó a sí mismo. Lubrique con rociador de silicón. No hay suficiente hilo en el carrete Instale más hilo. Vea la sección Reemplazo del hilo arriba en este manual. El hilo se desgastó hasta quedar muy corto. Tire de hilo secuencias mientras que presiona el botón. El hilo está enredado en el carrete. Retire el hilo del carrete y vuelva a enrollarlo.
GARANTÍA DECLARACIÓN DE LA GARANTÍA LIMITADA Techtronic Industries North America, Inc. garantiza al comprador original al menudeo que este producto de la marca RYOBI® carece de defectos en los materiales y en la mano de obra, y acuerda reparar o remplazar, a la sola discreción de Techtronic Industries North America, Inc., cualquier producto defectuoso, sin cargo alguno al comprador, dentro de los siguientes períodos de tiempo a partir de la fecha de compra.
NOTAS 13 — Español
OPERATOR’S MANUAL MANUEL D’UTILISATION / MANUAL DEL OPERADOR 18 VOLT STRING TRIMMER/EDGER 18 V TONDEUSE À FOUET/TAILLE-BORDURE 18 V RECORTADORA DE HILO/RECORTADORA DE BORDES P2006 CALIFORNIA PROPOSITION 65 WARNING: This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling.