Use and Care Manual

4 – English
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
If any parts are damaged or missing, please call 1-800-860-4050 for assistance.
ASSEMBLY
WARNING:
Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is suf-
ficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of at-
tachments or accessories not recommended can result
in serious personal injury.
WARNING:
Keep the bug zapper away from combustible materials. If
wrapped or in contact with fabrics, the light may produce
sufficient heat to melt some fabrics.
WARNING:
To reduce the risk of fire, remove insects and empty bug
tray frequently.
WARNING:
Do not insert foreign objects into this product. Doing so
could damage the product and/or result in an electric
shock.
APPLICATIONS
You may use this product for the purpose listed below:
Eliminating mosquitos and other flying insects
Illuminating areas requiring additional light
INSTALLING/REMOVING BATTERY PACK
See Figure 1.
 Insert the battery pack into the product as shown.
 Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured before
beginning operation.
WARNING:
Battery tools are always in operating condition. Therefore,
unit should always be OFF with the battery pack removed
when not in use. Failure to follow these instructions could
result in serious personal injury.
 Depress the latches to remove the battery pack.
WARNING:
Always remove battery pack from your product when you
are assembling parts, making adjustments, cleaning, or
when not in use. Removing battery pack will prevent ac-
cidental starting that could cause serious personal injury.
OPERATION
FEATURES
PRODUCT SPECIFICATIONS
Grid voltage .............................................................2550 V
UV LED light ......................................................10.6 Watts
Area light lumens ................................ 9 (low), 18 (medium),
and 30 (high)