SDS

Page 10 of 12
Test 4
Shock
- Mass loss limit (leakage)
1) If M<1g, less than 0.5%,
2) If 1g≤M≤75g, less than 0.2%,
3) If M>75g, less than 0.1%)
Pass
Test 5
External short circuit
- No disassembly, no rupture, no fire
within 6 hours after the test
- Max. Temp ≤ 170℃
Pass
Test 6
Impact or Crush
- No disassembly, no fire
within 6 hours after the test
- Max. Temp ≤ 170℃
Pass
Test 7
Overcharge
- No disassembly, no fire
within 7 days after the test
Pass
Test 8
Forced discharge
- No disassembly, no fire
within 7 days after the test
Pass
15. Regulatory Information
Canadian Federal Regulations:
These products have been classified in accordance with the hazard criteria of the Controlled Products Regulations
and the SDS contains all the information required by the Controlled Products Regulations.
WHMIS Classification: Not Controlled, manufactured article.
New Substance Notification Regulations: Lithium hexafluorophosphate is listed on the Non-Domestic
Substance List (NDSL). All other ingredients in the product are listed, as required, on Canada’s Domestic
Substances List (DSL).
National Pollutant Release Inventory (NPRI) Substances: These products do not contain any NPRI chemicals.
United States Federal and State Regulations:
TSCA Status: All ingredients in these products are listed on the TSCA inventory.
OSHA: These products do not meet criteria as per Part 1910.1200, manufactured article.
SARA EPA Title III: None.
Sec. 302/304: None.
Sec. 311/312: None.
Sec. 313: None.
CERCLA RQ: None.
Australia and New Zealand
SUSMP: Not applicable
AICS: All ingredients are on the AICS list.
HSNO Approval number: Not applicable
HSNO Group Title: Not applicable
NOHSC:10008 Risk Phrases: R34 - Causes Burns.