Use and Care Manual

8 - English
CONNECTING YOUR PRIMARY SPEAKER TO
Bluetooth
®
See Figure 3, page 14.
Press the GEAR/POWER button to power on the Score
™
Primary Speaker.
Continue to press the GEAR/POWER button until the
flashing “bt” logo appears on the LCD screen. This signi-
fies that the Primary speaker is looking for a Bluetooth
®
connection.
Using your Bluetooth
®
capable device, select Ryobi
™
P760 Score
™
under your setting for Bluetooth
®
to con-
nect.
The “bt” logo will stop flashing on the LCD screen, sig-
nifying a successful Bluetooth
®
connection.
NOTE: If your Bluetooth
®
capable device asks for a pass-
word, enter “0000” and the device will connect.
PRESET BUTTON
If paired to a Bluetooth
®
capable device, holding the
PRESET button for more than 2 seconds will cause the
Score
™
Primary Speaker to drop connection with the
current device.
When in Bluetooth
®
mode, if the Score
™
Primary Speaker
does not automatically pair with any recent devices, press
the PRESET button once. The Score
™
Primary Speaker
will then attempt to pair with the last paired device.
Bluetooth
®
PLAYBACK CONTROLS
Once the Score
™
Primary Speaker has paired with a
Bluetooth
®
capable device, playback can be paused/
played using the PRESET button.
Tracking forward and back can be activated by pressing
the TUNE/SEEK button.
OPERATION
CONVERTING A P760 Score
™
PRIMARY
SPEAKER INTO A SECONDARY SPEAKER
See Figures 4 and 6, page 14.
SKAA
®
technology allows you to transform a second
Primary Speaker into a Secondary Speaker.
Press the GEAR/POWER button to power on the Score
™
Primary Speaker.
Press the GEAR/POWER button until SKAA
®
shows up
on the LCD screen.
The Score
™
Primary Speaker will now be able to pair with
any SKAA
®
transmitter, such as another Score
™
Primary
Speaker or any other SKAA
®
transmission device.
SPEAKER CONFIGURATION
See Figures 5 - 6, page 14.
Up to four Secondary Speakers may be connected to a
Primary Speaker.
Each of the Secondary Speakers requires a charged
Ryobi
™
One+
™
18 Volt battery pack or included AC power
adaptor for operation.
USING A Score
™
PRIMARY SPEAKER IN SKAA
®
MODE (USING A PRIMARY AS A SECONDARY)
Make sure there’s a SKAA
®
transmitter (or another Primary which is in Bluetooth
®
, FM or AUX mode) nearby which is playing
audio. Make sure your Score
™
Primary is in SKAA
®
mode and adjust the volume to around 10. If you hear nothing or hear
the wrong audio, click the Bond button 6 times. If you still hear the wrong audio, click the Bond button 2 times (repeat if
necessary). Once you hear the right audio, hold the Bond button down for a few seconds until the Indicator (LED) turns Green.
USING SKAA
®
RECEIVERS
(APPLIES TO BOTH Score
™
SECONDARY AND Score
™
PRIMARY IN SKAA
®
MODE)
Each SKAA
®
receiver has a Green List which remembers your favorite transmitters. A Green Indicator on your receiver
means you are listening to a favorite, or hunting for one. Your receiver can also explore to find new transmitters—an Amber
Indicator means you are exploring for transmitters which are not on your Green List. A Cluster is a product with two or more
pieces which behave as one, such as a left and right speaker pair. The Bond Button lets you select which transmitter you’re
listening to. The Bond Button has the logo .