Use and Care Manual

9 - English
ESSENTIALS
Bond button Command Indicator Meaning
Hold a few
seconds
Add / Delete
Manually add/delete the current transmitter to/
from your Green List
Yellow to
Green
= Added
Red (flash)
= Deleted
—
Auto Add
SKAA
®
will automatically add the current Amber
transmitter to your Green List if you listen to it for
30 minutes
Yellow to
Green
= Added
1 Click
Green Mode
Rotate through your list of favorite transmitters
(Green List) — when a favorite transmitter is
found, the search stops and audio plays from that
transmitter
Green (dim)
Green (flash)
Green (bright)
= Hunting
= Next one
= Bonded
2 Clicks
Amber Mode
Explore for new, unknown transmitters (ones which
are not already on your Green List)
Amber (dim)
Yellow
= Hunting
= Bonded
OPERATION
OTHER COMMANDS
Bond button Command Indicator Meaning
3 Clicks
Mute
Do again to Unmute; any Click command will first
Unmute and then do its function
(slow flash)
Yellow,
Green, or
Red
= Muted
4 Clicks
Red Mode
If you have 2 or more transmitters on your Green
List, power on just the one you want to hear and
it plays automatically.
Red (dim)
Red (bright)
= Hunting
= Bonded
6 Clicks
Factory Reset
Clear Green List. Start Over!
Red (flash)
Reset Done
Hold during
power on
Make a Cluster
of Receivers
1. Power off all transmitters and receivers
2. Choose the desired Primary receiver in the
cluster of receivers.
3. Power on the Primary receiver while holding
down its Bond Button—hold the button down
until the Indicator begins to flash Red
4. With the remaining receivers within 3 meters of
the Primary receiver, power on the first one, wait
for its Indicator to flash Red and then power on
the second one; continue until all of them are
powered on
5. Once all of the Indicators stop flashing (turn solid
Red), power off all of the receivers
Red (flash)
Red (bright)
Receiver has
entered
“Cluster Up”
mode
The Cluster has
been success-
fully made