ORIGINAL INSTRUCTIONS Cordless Circular Saw R18CS
Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
Safety Safety, performance, and dependability have been given top priority in the design of your cordless circular saw. INTENDED USE The circular saw is intended to be used only by adults who have read and understood the instructions and warnings in this manual and can be considered responsible for their actions. The saw is designed for rip- and cross-cutting of wood or similar materials up to a maximum depth of 54 mm. It can make straight or bevelled cuts between 0 and 45 degrees.
Safety and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean.
Safety Ŷ adjustment shifts while cutting, it may cause binding and kickback. Use extra caution when sawing into existing walls or other blind areas. The protruding blade may cut objects that can cause kickback. LOWER GUARD FUNCTION Ŷ Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is accidentally dropped, lower guard may be bent.
Safety are all thought to contribute to the development of these symptoms. There are measures that can be taken by the operator to possibly reduce the effects of vibration: Ŷ Keep your body warm in cold weather. When operating the product, wear gloves to keep the hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud’s Syndrome. Ŷ After each period of operation, exercise to increase blood circulation. Ŷ Take frequent work breaks.
Know your product 6 5 7 4 8 9 3 10 11 12 2 1 13 14 15 5
Getting started 1 2 3 6
Getting started 3 4 3 4 6 5s 3s 3 3
Getting started 5 7
8
Operation 1 2 40 45 10 - 52 mm 3 9
Operation 1 1 2 3 Û Û Û 2 3 3 5s 3s 10 3
Operation 1 1 2 3 2 Û Û 3 4 5s 3s 3 11
Maintenance 1 2 3 3 20170829v3 4 12
Maintenance 1 2 3 3 3 13
PRODUCT SPECIFICATIONS BATTERY AND CHARGER Cordless Circular Saw Model Model R18CS Voltage 18 V Blade diameter 165 mm Blade arbor 16 mm Cutting capacity at 0º 52 mm Cutting capacity at 45º 36 mm No-load speed 4,700 min-1 Blade - width of cut 1.6 mm Blade teeth 24 T Blade thickness 1.0 mm Weight (According to EPTA procedure 01/2003) 2.8 kg Weight - not incl. battery pack 2.
RYOBI® WARRANTY APPLICATION CONDITIONS In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below. 1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use.
AUTHORISED SERVICE CENTRES ACD PLANT LTD Churwell Morley, Leeds Phone: 01142 474080 145 Southbank Road LS27 7TH Email: stores@powertech-industrial.co.uk Coundon Phone: 0113 2718494 Web: www.powertech-industrial.co.uk Coventry, West Midlands Email: info@cdpowertools.co.uk CV6 1FG Web : www.cdpowertools.co.uk Phone: 02476 594348 RYCKO Technical Services LTD 104 Green Lane Email: danmcgunigle@acdplant.co.uk C J Sinclair Limited St Albans, Herts Web: www.acdplant.co.
DECLARATION OF CONFORMITY Techtronic Industries GmbH Max-Eyth-Straße 10, 71364 Winnenden, Germany Herewith we declare that the product Cordless Circular Saw Brand: RYOBI Model number: R18CS Serial number range: 44442502000001 - 44442502999999 is in conformity with the following European Directives and harmonised standards 2006/42/EC, 2014/30/EU, 2011/65/EU, EN 55014-1:2017, EN 55014-2:2015, EN60745-1: 2009+A11:2010, EN60745-2-5:2010 RoHS documentation is compiled according to EN 50581:2012 Andrew John Eyre
Techtronic Industries GmbH Max-Eyth-Straße 10, 71364 Winnenden, Germany 961075359-03