OPERATOR'S MANUAL 10 in. (254 mm) BUFFER/POLISHER MODEL RB101 Your new buffer/polisher has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. When properly cared for, the buffer/polisher will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Ryobi product.
TABLE OF CONTENTS General Safety Rules ............................................................................................................................................ 3-4 Specific Safety Rules ................................................................................................................................................ 4 Symbols .......................................................................................................................................................
GENERAL SAFETY RULES Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts or drawn into air vents. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on, invites accidents. WARNING: Read and understand all instructions.
GENERAL SAFETY RULES When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury. SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SPECIFICATIONS Orbits per minute .............................................................................................................................................. 3200/min. Orbit Diameter ...........................................................................................................................................1/2 in. (13 mm) Motion .....................................................................................................................................................
UNPACKING INSTRUCTIONS WARNING: When unpacking the buffer/polisher: Carefully remove the tool and accessories from the box. Make sure that all items listed in the packing list are included. Inspect the tool carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
FEATURES KNOW YOUR BUFFER/POLISHER APPLICATION BONNET See Figure 1. Before using the buffer/polisher, familiarize yourself with all operating features and safety requirements. The reusable application bonnet is made of 100% terry cloth. POLISHING BONNET The reusable polishing bonnet is made of synthetic tufted material. WARNING: Do not allow familiarity with your buffer/polisher to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
OPERATION WARNING: WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, or loose particles being thrown into your eyes, resulting in possible serious injury. The drawstring must be tucked securely inside the bonnet before turning the buffer/polisher on. Failure to do so could result in the drawstring being caught between the motor housing and orbiting foam pad, increasing the risk of serious personal injury.
OPERATION WARNING: Always wear safety goggles or safety glasses with side shields during operation. APPLICATION OF LIQUID POLISH See Figure 4. Apply a small circle of liquid (about the size of a half-dollar) around the center of the bonnet, followed by two more rings, each slightly larger than the previous one. After the first application, the bonnet will not absorb as much polish. Apply two rings of polish to the bonnet for subsequent applications, using half of the initial quantity.
MAINTENANCE types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool using compressed air. WARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. APPLICATION AND BUFFING BONNETS WARNING: The buffer/polisher should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use.
OPERATOR'S MANUAL 10 in. (254 mm) BUFFER/POLISHER MODEL RB101 CUSTOMER SERVICE INFORMATION For parts or service, contact your nearest Ryobi authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-800-525-2579 or visit us online at www.ryobitools.com. The model number of this tool is found on a plate attached to the buffer/polisher. Please record the serial number in the space provided below.