RPW120HS/RPW130HS HydroSurge™ Electric Pressure Washer OPERATOR'S MANUAL WARNING! To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. RPW120HS manual.
ENGLISH(Original Instructions) INTENDED USE The cleaner is intended only for the cleaning of vehicles, boats, buildings, etc, by the removal of stubborn dirt using clean water and chemical detergents. . For domestic use only, not for professional use, and only for operation at temperatures above 0° C . WARNING: High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself.
ENGLISH(Original Instructions) WARNING: To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ To reduce the risk of injury, High pressure cleaners shall not be used by children or untrained personnel. keep children and visitors away. All visitors should wear safety glasses and be kept a safe distance from work area. Use correct product.
ENGLISH(Original Instructions) SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard.
ENGLISH(Original Instructions) The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
ENGLISH(Original Instructions) PRODUCT SPECIFICATIONS PRODUCT SPECIFICATIONS High Pressure (RPW120HS) Rated pressure................................................................................................... 11 Mpa Permissible Pressure…...................................................................................... 12 Mpa Maximum Water Flow.......................................................................................... 5.3 l/min Low Pressure (High Flow) Permissible Pressure..........
ENGLISH(Original Instructions) Before using this product, familiarize yourself with all operating features and safety rules. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. DETERGENT TANK Remove the cap from the detergent tank to add detergent to the pressure washer.
ENGLISH(Original Instructions) plastic fitting and goes on the spout at the bottom of the gun. ■ Grasp the plastic fitting and slide onto the spout until it clicks into place. ■ To remove, depress the latch on top of the fitting and remove the hose from the spout. ■ The high pressure hose has a metal connection and slides into the opening at the top of the gun. ■ Grasp the hose lock and pull outward to clear the way for the high pressure hose to be inserted.
ENGLISH(Original Instructions) Low Pressure (High Flow) Rinsing: Move the low pressure (high flow) lever on top of the trigger handle forward. This will provide a spray of water at low pressure. NOTE: When using low pressure (high flow) rinsing only, engage the high pressure trigger lock-out to prevent accidental depressing of the high pressure trigger. ■ To dispense soap, turn the detergent dial to the ON position. ■ To revert back to water only rinsing at low pressure, turn the detergent dial to OFF.
ENGLISH(Original Instructions) ■ When the pressure washer is needed again, depress and hold the handle release button while pulling up on the handle to restore it to normal operating position. ■ Remove the nozzle from the lance. NOTE: Never point the spray lance at your face. ■ Using a straightened paper clip or nozzle cleaning tool, free any foreign materials clogging or restricting the nozzle. ■ Using a garden hose, clear/flush debris out of nozzle. ■ Reconnect the nozzle to the lance.
ENGLISH(Original Instructions) TROUBLESHOOTING Problem Possible Cause Pressure washer does not start when trigger is depressed Pump doesn’t produce pressure Machine doesn’t reach high pressure Connect the power cord to a live 220-240V AC, 50 Hz AC plug. Power cord not connected to power source Turn switch on. Switch is off House circuit breaker is tripped Reset house breaker. Make sure pressure washer is connected to an individual branch circuit only.
LIMITED WARRANTY TTI warrants this outdoor product to be free of defects in material and workmanship for 24 months from the date of purchase by the original purchaser, subject to the limitations below. Please keep your invoice as proof of date of purchase. This warranty is only applicable where the product is used for personal and non-commercial purposes.
TECHTRONIC INDUSTRIES EMEA Medina House, Fieldhouse Lane, Marlow, Buckinghamshire, SL7 1TB, UNITED KINGDOM RYOBI TECHNOLOGIES (UK) LIMITED. Medina House, Fieldhouse Lane, Marlow, Buckinghamshire, SL7 1TB, UNITED KINGDOM Tel: + 44 (0) 1628 894400 Fax: + 44 (0) 1628 894401 Technical Helpline : + 44 (0) 800 389 0305 TECHTRONIC INDUSTRIES FRANCE SAS Immeuble Le Grand Roissy Z.A.