Use and Care Manual

The following tools (not included or drawn to scale) are needed for assembly and making adjustments:

TOOLS NEEDED

FEATURES

BLADES

For maximum performance, it is recommended that you use

the 24-tooth, 10 in. carbide-tipped combination blade pro-

vided with your saw. Additional blade styles of the same high

quality are available for specific operations such as ripping.

Your local dealer can provide you with complete information.

Kerf width must be within the limits stamped on the riving

knife.

WARNING:

Do not use blades rated less than the speed of this tool.

Failure to heed this warning could result in personal injury.

Fig. 4

FRAMING SQUARE

PHILLIPS

SCREWDRIVER

FLATHEAD

SCREWDRIVER

SOCKET WRENCH

AND 8 mm SOCKET

COMBINATION

SQUARE

C-CLAMPS