Manual

STARTING AND STOPPING

See Figures 21 - 23.

To start a cold engine:

DO NOT squeeze the throttle trigger until the engine starts

and runs.

[] Lay the trimmer on a flat, bare surface.

[] PRIME - Press the primer bulb 7 times.

[] SET the start lever to the START position.

[] PULL the rope until the engine starts.

[] Wait 6-10 seconds, then squeeze the trigger to run.

NOTE: Squeezing and releasing the throttle trigger releases

the start lever to the RUN position.

To start a warm engine:

PULL the rope until the engine starts.

To stop the engine:

Press and hold the switch in the stop " _ " position until

the engine stops.

IGNiTiON

SWITCH

TRIGGER

LOCK

THROTTLE

TRIGGER

START

POSITION

START

LEVER

RUN

POSITION

START

LEVER

Fig. 22

Fig. 23