Use and Care Manual

11 — English
TROUBLESHOOTING
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM POSSIBLE CAUSE SOLUTION
Handle not in position. Handle adjustment knobs and/or handle
lock levers are not secured.
Make sure handle adjust knobs are fully
seated and handle lock levers are fully
closed.
Snow blower not starting. Battery is low in charge.
Start button is not depressed.
Charge the battery.
Press start button.
The motor is on but the impeller does
not turn.
The drive belt is worn or broken. Have the drive belt replaced by an
authorized service center.
After passing, the snow blower leaves
a layer of snow on the ground.
The impeller/scraper mechanism is
worn.
Have the impeller/scraper mechanism
replaced by an authorized service
center.
MAKE THE MOST OF YOUR PURCHASE!
Go to http://register.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the RYOBI Help Line!
This product has a Five-year Limited Warranty for personal, family,
or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-860-4050.