Use and Care Manual

16 − English
TABLE
EXTENSION
BASE
SAW VIEWED
FROM BOTTOM
TABLE
EXTENSION
SCREW
ASSEMBLY
TABLE EXTENSIONS
See Figures 12 - 14.
Table extensions have been provided for both the left and
the right side of the saw.
To install table extensions:
 Remove the screw from the bottom of the base.
 Insert the ends of extension into the holes in the sides of
the base.
 Reinstall the screw through the extension and secure into
the base.
 Repeat for other extension.
Fig. 13
Fig. 12
Fig. 14
TABLE
EXTENSION
BASE